Posts

نهشت کانی سپرده های معدنی

Image
 نهشت کانی، سپرده معدنی (Mineral Deposits) سپرده معدنی ، تجمیع یک ماده معدنی با غلظت غیرمعمول بالا را گویند. حدود نیمی از عناصر کیمیایی شناخته شده دارای برخی ازخواص فلزی هستند. گرچه اصطلاح فلز فقط برای آن دسته ازعناصر شیمیایی اختصاص داده شده است که دارای دو یا چند مورد از خصوصیات فیزیکی مشخص فلزات (کدورت ، تورق، انعطاف پذیری، قابلیت ذوب) هستند وهمچنین رساناهای (conductors) خوبی برای گرما و برق هستند. تقریباً 40 فلز از طریق استخراج و ذوب مواد معدنی که در آنها موجود اند در دسترس قرار می گیرند.  انواع خاصی از مواد معدنی را می توان با آسودگی بیشتری نسبت به بقیه ذوب کرد؛ که معمولاً بنام مواد معدنی یاد میشوند. مواد معدنی معدنی تمایل دارند که در توده های سنگی محلی و کوچک متمرکز شوند که در نتیجه فرآیندهای خاص زمینی تشکیل می شوند و به این غلظت های محلی رسوبات معدنی گفته می شود. سپرده های معدنی همان چیزی هستند که جستجوگران به دنبال آن هستند. اصطلاحات کانه (ore mineral) و سپرده معدنی در اصل فقط برای کانی یا منرال ها و مواد معدنی که فلزات از آنها بازیابی می شد مورد استفاده قرار می گرفت، ا...

ساختمان ماليكولها و قطبيت آن ها

Image
 (Molecules structure and their polarity)

روابط کیمیاوی

Image
Chemical bonds 

ترتیب الکترونی و خواص دوره یی عناصر

Image
Electron configuration and periodic property of elements 

انکشاف تیوری اتومی

Image
(Evolution of Atomic Theory)

Iron and steel support in underground mining

Image
Iron and steel support in underground mining  Iron and steel are used in mines in the form of rigid and yielding props, beams and girders, reinforcement in concrete, corrugated sheets and roof/floor bolts. Steel props used in the miners are: a)      Rigid props b)        Yielding props An ordinary Horizontal section steel girder of suitable length with the web cutaway and flanges turned over at one or both ends is the common type of rigid prop. If the prop buckles in use it can be straightened by hydraulic pressure situated at the pit bottom. Another timber core through major length extending 25 to 40 mm beyond the steel pipe at either end. The timber core yields to some extent to the roof weight. Yielding Props:  1. Friction Props MAMC Friction Props: The friction props type FP3 manufactured by M.A.M.C. consists of two seamless steel tubes of which the inner member is made captive to the outer member by means of a spring locki...

Timber support for different places in mine

Image
Timber support in coal mine Side Support:  Wooden laggings are placed tight between vertical props and pillar where the sides are weak and need support. Sometimes the timber set of prop and bar has to resist pressure from sides which tend to crush into the roadways. Notching is useful in such cases. The props should be set at an angle of 14° to 20° off the vertical and the feet well sunk into the floor. An alternative method of resisting side pressure is to sink the props well into the floor and to reinforce the timber-set by an additional bar or stretcher (dotted bar in fig), which may be nailed to the props. As this reduces effective height of roadway, its use may not be advisable in roadways of less than 2 m height, used by basket loaders. Reinforced Timber set or chockmate Notched Prop Support of a Roadway:  Where the roof of a roadway is bad over some distance bars resting in holes of coal pillars and tightened against the roof by wooden laggings may be...

Popular posts from this blog

Different types of timber support

Indicated , inferred, measured resources

Timber support for different places in mine

50 common word roots, prefixes and suffixes

Options, Call & Put options, futures

Sandstone uranium deposits

Unconformity-Related Uranium Deposit

Roof support in underground coal mine